Kettlebell training over 40: four exercises for your routine
A swing sends the bell forwards with a sharp hip drive. A goblet squat keeps it close to your chest as you lower and stand. Kettlebells let you practise both controlled strength work and dynamic movement with little equipment: one bell, a clear space and two scheduled sessions are enough to start. Begin with deadlifts and goblet squats, adding the swing, clean and press, and snatch as you learn the skills each requires.
Calisthenics and kettlebells: strength without a gym shows how to combine the bell with bodyweight exercises and rings. For ring exercises and two session outlines, see Gymnastic rings training: choose your exercises.

What the training offers
Train for strength with little equipment. Squats work your legs and glutes, while overhead presses challenge your shoulders and arms. Swings require a powerful hip extension with a stable torso. A supervised kettlebell study in older adults reported improvements in grip strength and estimated deadlift performance.1
Practise different movement skills. Goblet squats use a controlled lowering and lifting action, while swings rely on dynamic hip drive. The clean and press takes the bell to your shoulder and then overhead. Once you have the foundations, the more demanding snatch offers another movement to learn without adding a roomful of machines.
Make training a regular appointment. Set aside Tuesday and Friday, for example, and record the weight and repetitions after each session. Progress might mean a smoother clean or a better-controlled swing rather than a heavier bell.
Muscle size, strength and power describe different things
Muscle size, the load you can lift and mechanical power are different training measures. Explore the connections and relevant training variables in Strength, muscle size and power: what are you training?.13
Which kettlebell weight is right for you?
Weight guide for women
- New to strength training: Try 8 kg for deadlifts, goblet squats and, later, learning the swing. If you cannot control it securely, a lighter option, such as 4 or 6 kg, is a better learning step.
- Regular strength training, but new to kettlebells: 8 to 12 kg is a useful range to try. Start at the lower end for an unfamiliar movement. Experience with other weights does not replace kettlebell technique.
- Established kettlebell skills: 12 to 16 kg, or more where your skills support it, can suit two-handed basics. Choose press and snatch loads separately.
Weight guide for men
- New to strength training: Try 12 kg for the basics. If picking it up or performing the movement under control is not yet possible, 8 kg can be a better learning load.
- Regular strength training, but new to kettlebells: 12 to 16 kg, often 16 kg for well-controlled two-handed basics, is a useful starting guide.
- Established kettlebell skills: 16 to 24 kg may suit two-handed basics, with 20 kg as a possible intermediate step. More demanding one-arm or overhead movements may still require substantially less.
The starting loads come from coaching recommendations. The wider ranges are our examples to try for two-handed basics. Technique, strength-training experience and the exercise matter more than the women’s or men’s category. The same person might use 16 kg for an established swing and 6 kg for a newly learned press.7, 8, 10
Why you do not need the same bell for all four exercises
- Goblet squat: Both hands hold the bell close to your chest. Choose a load that lets you perform several controlled squats without pushing the bell away or losing your position.
- Two-handed swing: Your hips and legs generate the drive. With practice, this can often use more weight than a press. Learn the hip hinge through deadlifts first.
- Clean and press: Choose for the limiting movement, usually the press, and your less capable side. If you can clean the bell but can only press it using knee drive or arching your back, it is too heavy for the strict press described here.
- Snatch: Learn the swing and clean first, then hand insertion with technique feedback. Choose the load again for this movement rather than automatically using your swing weight.
Try this weight check before buying
If you can, try two neighbouring weights at a gym, in a class or with a coach. Use the four steps below to find a suitable load for an exercise you have already learned.
- Pick it up securely: Do five two-handed deadlifts, setting the bell down under control each time. Keep your back in its natural position and avoid yanking the weight off the floor.
- Check your intended exercise: Use only a movement you already know, such as five controlled goblet squats. Choose a light, manageable press load separately. Swings and snatches are not spontaneous shopping tests if you have not learned them yet.
- Leave a reserve: For slow strength exercises, finish feeling that approximately two more good repetitions would be possible. If you compensate, hold your breath in a strained effort or struggle to lift the bell, choose a lighter weight. For swings, consistent movement quality matters more than pushing to exhaustion.
- Consider both sides: Choose one-arm loads for the side on which you are less confident.
If you want to buy just one bell: Choose it for your first routine, not a future snatch goal. For deadlifts and goblet squats, a manageable load is more useful than a heavy bell bought in advance. If you also want to press one-handed, a second, lighter bell may work better than one compromise weight. An adjustable kettlebell is another option, provided it suits the movements you plan to practise and locks securely.
Why a swinging bell feels different
A kettlebell’s mass does not change when it swings. Accelerating, redirecting and decelerating it does create additional dynamic forces. Its body also sits outside your grip. This can make a moving load feel much more demanding than simply holding it. The size of these forces depends on factors including speed and movement radius.11
Choose a load you can control while learning the movement. A light bell still needs hip drive in the swing rather than an arm lift. Technique feedback is more useful than extra kilograms.
Clear your training area and keep furniture, people and pets out of the way. Overhead exercises also need sufficient ceiling clearance. Stop if you feel pain. If you have an injury, symptoms or uncertainty about your capacity, seek individual professional guidance before starting.
1. Kettlebell swing: the hips provide the drive
The two-handed swing to approximately chest height described here starts with a hip hinge. It is neither a deep squat nor a lift powered by the arms. Practise the deadlift first: bell between your feet, hips back, both hands on the handle, stand with control and lower it again.4

How the movement works:
- Put the kettlebell a short distance in front of your feet. Stand roughly shoulder-width apart, push your hips back and slightly bend your knees. Grip with both hands, keep your back in its natural shape and brace your torso.
- Tilt the bell towards you and hike it high between your thighs. Keep your arms long as your hips move back.
- Extend your hips powerfully until you stand upright. This impulse lets the bell float forwards to approximately chest height. Do not lift it with your shoulders or lean backwards at the top.
- Let the bell swing back. As your arms return towards your body, move your hips back. To finish, guide the bell from the final backswing to the floor in front of you with control.
Common mistakes: squatting too deeply, rounding your back, pulling with bent arms or throwing the bell progressively higher. Your focus: use your hips to drive the bell and your arms to guide it. Learn the backswing and controlled finish in short sets with technique feedback.
2. Goblet squat: keep the weight close
In a goblet squat, you hold the kettlebell at your chest. This keeps the movement straightforward and gives you a clear reference point for your posture.3

- Pick up the bell with control and hold the sides of its handle in both hands, close to your chest. Your elbows point down.
- Place your feet roughly shoulder-width apart, toes slightly out if appropriate. Spread pressure across the whole foot.
- Bend your hips and knees. Your knees follow your toes, your chest stays upright and your back keeps its natural shape.
- Lower only as far as you can control while keeping your heels down. Stand without bouncing or using momentum.
Common mistakes: holding the weight far from your body, lifting your heels or forcing extra depth with a rounded back. Your focus: a shallower controlled squat is more useful than a deeper repetition that loses its position.
3. Clean and press: shoulder first, then overhead
This exercise has two parts. In the clean, you bring the bell close to your body into the rack position at your shoulder. In the strict press, you press it overhead without driving with your legs. Practise the parts separately first and choose a weight you can also control in the press.4,5

- Begin with a hip hinge and short backswing, as for a one-arm swing. Use hip drive to send the bell upwards, keeping it closer to your body than in a swing.
- Guide your elbow close to your body and pass your hand through the handle. Let the bell roll around your hand into the rack instead of striking your forearm from above.
- Pause in the rack: elbow close to your torso, wrist approximately straight, bell body outside your forearm. Stand tall and brace your torso.
- Press the bell overhead with control. Finish with your arm extended roughly beside your ear, without arching your back or bending your knees to drive the weight.
- Lower the bell to the rack with control first. Then use the clean return you have learned to lower and park it safely before changing sides.
Common mistakes: turning the clean into a biceps curl, banging the bell onto your forearm, bending your wrist back or leaning backwards in the press. Your focus: a smooth clean and steady press matter more than linking them quickly with too much weight. Learn the rack and return with personal technique feedback.
4. Kettlebell snatch: a later technical step
A snatch takes the bell overhead with hip drive in one continuous movement, without stopping in the rack or adding a press. It requires a dependable single-arm swing, a dependable clean, a controlled overhead position and practised handling. Learn the close high pull with technique feedback first as well.6

Understand the movement before practising it:
- Start from a single-arm backswing. Extend your hips to send the bell upwards while keeping your back in its natural shape.
- Guide the bell upwards close to your body, briefly bending your elbow. A large arc far in front of you makes the transition harder.
- As the bell briefly floats, pass your hand through the handle and extend your arm. The bell settles behind your forearm rather than flipping onto it.
- Finish upright with the arm extended overhead. Keep your wrist approximately straight and your torso stable, without leaning backwards.
- Learn the return as deliberately as the upward movement. Practise it under instruction first instead of letting the bell drop uncontrollably or adding long strings of repetitions on your own.
Common mistakes: inserting the hand too late, letting the bell strike the forearm or pressing out the final part. Your focus: a few clean technique attempts with a light weight. If your swing, hand changes or overhead position are not yet dependable, stay with the earlier learning steps.
Check your range of movement before adding weight
Practise the hip hinge and a squat without the bell first. Choose a squat depth where your heels stay down and you can stand up steadily. Check your pressing path without a load: if you have to arch your lower back, do not force the overhead position with weight. Stick to movements you already control and get technique feedback. Extra depth or reach is not a reason to continue a poor repetition.12
Your weekly plan: build a base, then add skills
You could train on Tuesday and Friday, leaving days off between sessions. Warm up with a few minutes of brisk movement, practise unloaded hinges and squats, then begin with an easy practice set. Two regular appointments make training easier to schedule. General resistance-training guidance also supports regular sessions.2
| Stage | Prerequisite | Example session | Next step |
|---|---|---|---|
| Foundations | You are practising the pickup, hip hinge and putting the bell down. | Deadlift: 2 sets of 6 to 8 reps. Goblet squat: 2 sets of 5 to 8 reps. | Repeat the simple session with consistent control. |
| Routine | Your swing, rack and light press are reliable. | Swing: 3 sets of 8 reps. Goblet squat: 2 sets of 6 to 8. Clean and press: 2 sets of 3 per side. | Record load and reps for each exercise. Change one variable at a time. |
| Technique | Your one-arm swing, clean, high pull and overhead position are reliable, and you have received personal instruction. | Single snatch practice reps early in the session, replacing part of your other work. | Have the catch and return checked before adding more reps. |
End each set as soon as you can no longer control the movement.
Stage 1 · Foundations
Your first session in approximately 20 minutes
This suits you if: You are starting out or still building a dependable hip hinge, grip and controlled finish. Today's goal is repeatable movement, not maximum exhaustion.
- Minutes 0 to 4: Move briskly, practise unloaded hip hinges and do a few bodyweight squats. Aim to warm up, not tire yourself out.
- Minutes 4 to 9: Try an appropriate load. Practise picking up and setting down the bell with deadlifts, then a few easy goblet squats. No swings or overhead movements yet if you have not learned them.
- Minutes 9 to 18: Deadlift for 2 sets of 6 to 8 repetitions, then goblet squat for 2 sets of 5 to 8. Rest roughly 1 to 2 minutes between sets. Choose a load for each exercise and leave approximately two good repetitions in reserve.
- Minutes 18 to 20: Put the bell away safely and record your training. Schedule your next session. You have completed a first workout you can build on.
The timing is a framework, not a race. If you need more rest or technique practice, extend the session or do fewer sets. After swing instruction, you can replace some of the deadlift block with 3 short sets of 5 swings. Without instruction, stay with deadlifts.
Your next step: Repeat the same straightforward session. Your last repetition should look as controlled as your first. Consider stage 2 only once your swing, rack and light press are dependable.
Stage 2 · Build a routine
Combine swings, squats and presses
This suits you if: You can park a swing under control, hold a steady rack and perform a light press without leaning back. Work through the exercises one at a time, putting the bell down as needed rather than trying to hold it throughout.
- Swing
- 3 sets of 8 repetitions. End the set earlier if hip drive, backswing or grip starts to deteriorate.
- Goblet squat
- 2 sets of 6 to 8 repetitions. Keep the bell close, feet stable on the floor and each repetition controlled.
- Clean and press
- 2 sets of 3 repetitions on each side. Choose for your press and less confident side. Park the bell under control between repetitions or sides if needed.
Your next step: Record weights and repetitions separately for each exercise. Improve one variable first, such as a smoother clean or one more good squat repetition, rather than making everything heavier at once.
Stage 3 · Refine your skills
Learn the snatch as a separate skill
This suits you if: Your one-arm swing, clean and stable overhead position are already dependable. Learn hand insertion and the controlled return with qualified technique feedback.
Following instruction, begin with single repetitions and deliberate resets. Initially replace some other work rather than adding snatches as an exhausting finisher. Choose the load again for this movement.
Your next step: Have your hand insertion and return checked. Until these are dependable, stay with swings, squats and presses. You do not need the snatch to build a good training routine.
Rest roughly 1 to 2 minutes between sets to begin with, or longer if needed. These plans are general examples, not an individual programme. Choose a stage according to how well you control the exercises, not how many weeks you have trained. Stop the set when your grip or posture starts to deteriorate.
When should you use a heavier kettlebell?
Consider a heavier bell once you can repeatedly perform the current task well. For goblet squats, use the following steps:9
- Build repetitions first: For goblet squats, for example, keep the same bell and progress from 2 sets of 6 to 7 and then 8 repetitions. Do not increase load, sets and speed together.
- Review the load: As our example check for goblet squats, after two consecutive sessions with 2 good sets of 8, ask: Did the bell stay steady? Did my posture stay consistent? Could I still have done approximately two good repetitions? If not, keep the same weight.
- Try the next step briefly: Once the current load has become too easy, try an available heavier bell for a few controlled repetitions and rebuild from the lower end of your range. If you compensate or cannot meet your planned minimum with good form, stay with the existing bell or try a smaller intermediate step. Reassess each exercise: a heavier swing bell does not automatically become your new press bell.2, 9
Kettlebell jumps can be bigger than they look: Moving from 8 to 12 kg increases the load by 50 percent, and moving from 16 to 20 kg adds 25 percent. That may be too much at once, especially for presses. Building more controlled repetitions with your current bell can be a better progression. Do not apply the squat repetition rule to swings: hip drive, backswing, grip and the controlled finish must stay consistent through the last repetition. Treat snatches as technique practice at first rather than an opportunity to lift heavier.
A training note might read: “Goblet squat, 8 kg, 2 × 6, steady, approximately two more reps possible. Next session: same weight.” Record both sides for one-arm exercises. Even this simple record shows whether you are progressing. Missing a session does not mean doubling the next one.
Common kettlebell training questions
What weight should I use for kettlebell training?
Choose a weight you can control in the specific exercise, from picking it up to putting it down. Try suitable options using the weight check above. A bell you can swing confidently may still be too heavy to press.
What should I keep in mind during kettlebell training?
Clear your training area and check ceiling clearance before overhead exercises. Practise the return and setting the bell down as carefully as the lift. Begin another repetition only when you have control of the bell.
Which kettlebell exercises can I start with?
Start with deadlifts and goblet squats. Add swings after instruction, then learn the further skills needed for cleans and presses. The snatch comes later and is not necessary for getting started.
What training formats can I use with kettlebells?
You can train by repetitions, by time or in a circuit. The example plan starts with separate sets and rest breaks so you can begin and finish each movement deliberately.
Where does food fit in?
Keep workout notes in a calendar or notebook and record meals in The 8 Protocol. The guide to nutrition values and portions helps with food logging. For choosing between a meal and a small snack before training, see what to eat before a workout. The protein guide explains amounts and meals for training days.
The basic version is free, and Plus is optional. View The 8 Protocol on the App Store.
Sources
- Meigh et al. (2022), BELL trial. Supervised training in previously insufficiently active adults aged 59 to 79, without a separate randomised control group.
- ACSM (2009), Progression Models in Resistance Training for Healthy Adults. General training principles, not a test of the example plan assembled here.
- ACE Exercise Library: Goblet Squat. Exercise technique.
- StrongFirst: The Kur for Your Kettlebell Swing and Clean. Technique, controllable loads and preparatory exercises.
- ACE: Advanced Kettlebell Workout for Increased Strength and Conditioning. Clean, rack and press, partly described with two bells.
- ACE / SHAPE: How to Do the Kettlebell Snatch. Movement sequence and advanced prerequisites.
- Greg Brookes: What Weight Kettlebell Should You Start With? Coaching guidance: often 8 kg for women and 12 or 16 kg for men. Later weights depend on skills and exercise.
- Living.Fit: How to Pick the Right Kettlebell Weight, with guidance from Marcus Martinez. Distinguishes one-arm and two-handed exercises. Coach/vendor guidance, not a universal weight prescription.
- Greg Brookes: Progressive Overload With Kettlebells. Build repetitions within a planned range, then increase load with consistent technique. There is no fixed weekly schedule.
- StrongFirst Kettlebell: What kettlebell sizes do I need? Weight selection based on strength. Coach/vendor guidance, not fixed progression stages.
- OpenStax: College Physics 2e, Centripetal Force. Relationship between mass, speed and radius.
- ACE: Joint Mobility and Stability. Range of movement, control and compensation. Not a diagnostic self-test.
- ACSM (2026), Resistance Training Prescription for Muscle Function, Hypertrophy, and Physical Performance in Healthy Adults. Overview of systematic reviews. Distinct training outcomes and variables in healthy adults. General resistance-training research, not a test of this kettlebell plan. Published April 2026.
